India Mark 2 Hand Pumps is the largest selling handpump in the word and is used in many countries of the world as the backbone of their community water supply. It is suitable for a depth of upto 50 Meters.
For places where the water is very corrosive, the following components are available:
Cylinder Assembly with all components
The entire above ground components are strong and sturdy. India Mark II Pump works on the positive displacement principle, hence the discharge remains constant irrespective of the depth of bore.
India Mark II Hand Pumps are available in different weight variants. It is available with either Color or Zinc Coating.
Type India Mark II Hand Pump
Type India Mark IIConnecting Rood
2 - 150kg
2 - 200kg
2 - 300 kg
2 - 400 kg
2 - 500 kg
2 - 600 kg
The above-ground mechanism is fabricated from welded steel plate and sections for strength and hot-dip galvanised for corrosion resistance.
A chain and quadrant mechanism of the pump handle provides easy and accurate alignment of the connecting rod.
The handle bar has a high mechanical advantage and is designed to counter balance the weight of the connecting rods to reduce the pumping effort required from the user.
Pre-greased, sealed Ball Bearings add to the ease of operation and elimination of greasing during use.
125 mm stroke length of the handle provides a water discharge of 1150 litres per hour with the cylinder installed in the range of the 15 m to 45 m below-ground level
Provision of a Third Plate facilitates the easy removal of head assembly for routine maintenance without disturbing the original factory fitment of the pivot mechanism
The Spout design ensures collection of water in any type of vessel normally used.
The Stand assembly is independent of the borewell, with legs directly grouted into the concrete platform. This ensures firm mechanical anchoring of the pump and a hygienic seal at the pump foundation
Cylinder with highly polished brass liner ensures long life of Nitrile Rubber Pump Bucket.